EnGenius ENS500-AC - 5GHz AC867 Wave2 Outdoor 3Km Long Range Point-to-Point Wireless Bridge & Access Point
Available to Order
Currently not in stock, available to order. Take note of the Estimated Delivery Lead Time below for this specific item, before placing your order(s), so you'd know when to expect delivery. Contact us for order-related enquiries.
- Stock: Zero Stock
- Brand: EnGenius
- Model: ENS500-AC
- EAN: 4713361934582
- MPN: 1102A1249301
The ENS500-AC 5GJz access point is an 802.11ac long range outdoor cpe that you can use for robust and reliable WiFi networking. You can use it as a Wireless Client Bridge/AP, to extend your existing Internet connection or extend Wi-Fi across buildings, point-to-point (p2p) or multipoint wireless bridging. It is capable of 867Mbps throughput under the 5GHz frequency band, with 14dBi internal directional antenna, perfect for long distance P2P networking.
Features
- Up to 867Mbps 5GHz speed performance
- 2x2 802.11ac Wave2 (MU-MIMO) equipped.
- Inbuilt high gain directional antenna 14dBi antena
- Safe & Robust IP55 enclosure for extreme weather deployment
- Easy Access Point reset via PoE Adapter (100 meters or 328 feet)
- GigE PoE port & adapter included for placement where power is limited
- Equipped with 802.11ac Wave2 engine to enhance overall bandwidth/speed
- Send/Receive Multiple HD quality IP surveillance content over wireless transmission
- Easy monitoring & device configuration on smartphone/tablet, thanks to EnGenius’ "EnWiFi" device management system
Deployment Scenarios
Below are few scenarios/applications where you can use the ENS500-AC or the ENS500EXT-AC in your outdoor wireless distribution projects.
- Airport Terminals
- Building Sites
- College Campuses
- Construction Sites
- Hospital Buildings
- Parks & Campgrounds
- Public Lightings
- Resort Properties
- Shopping Malls
- SmartHomes Project
- Stadiums & Arena
- Warehouse Operations
- and more
Technical Specifications
Wireless Radio Specification | |
---|---|
Access Point Type | Outdoor, IP55, dual radios concurrent, 5GHz 802.11 ac, 2x2 MIMO is backwards compatible with 802.11 ac/a/n mode |
SU-MIMO | Two (2) spatial stream SU-MIMO for up to 867 Mbps wireless data rate to a single wireless client device |
MU-MIMO | Two (2) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two (2) wireless client devices simultaneously |
Frequency Radios |
5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Note: The range of frequencies your device can operate on might differ based on the specific regulations of the country or area you’re in. Specifically for Ireland, if you intend to use this Access Point (AP) within the 5.8GHz frequency band, you must adhere to the regulations set forth by ComReg. |
Supported Radio Technology |
802.11n/ac: 2x2 MIMO with 2 streams 802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz 802.11n supports high throughput (HT) — HT 20/40 MHz 802.11n/ac packet aggregation: AMPDU, ASPDU Orthogonal frequency-division multiplexing (OFDM) under 802.11ac/a/n EnJet technology with Time Division Multiple Access (TDMA) under 802.11ac/n |
Supported Modulation Type |
802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM |
Transmit Power (Maximum Value) | 26dBm (Maximum power is limited by regulatory domain) |
Tx Beamforming (TxBF) | Increasing signal reliability and transmitting distance |
Supported Data Rates (Mbps) |
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2) |
Antenna | |
Antenna Types |
High-gain Directional 14dBi Internal Antenna Widely frequency supported from 5150MHz to 5925MHz |
Interfaces |
|
Networking Interface | Two (2) 10/100/1000 BASE-T RJ-45 Ethernet Ports |
LED Indicators | Display system and wireless transmission status |
Reset Button | Convert Access Point to the Factory default or the Users Default |
Power | |
Maximum Power Consumption | Maximum 8.93W |
Power Source |
Proprietary 24V PoE (Power: 4, 5; Return: 7, 8) Active Ethernet (Power Over Ethernet, PoE) |
Operating Mode | |
Access Point Mode (AP Mode) | Be an Access Point behaves like a central connection for station or clients that support IEEE 802.11 ac/a/n network |
Client Bridge Mode (CB Mode) | The Access Point essentially acts as a wireless adapter that connects to an access point to allow a system of wireless access to the network in the client bridge mode |
WDS Modes (WDS AP, WDS Station) | WDS modes uses WDS technology to establish the wireless connection via filling MAC address in both Access Points to enlarge the wireless area |
Exquisite RF Management | |
ACK timeout (Distance Control) | Set the ACK timeout to assure the proper distance to deliver wireless signal properly |
Site Survey | Scan signal level of an environment to provide parameters for performing Auto Transmit power and auto channel |
Auto Transmit Power | Automatically adjust power level |
Auto Channel | Automatically assign a clearly channel to perform RF transmission under a pervasive environment |
RSSI Threshold | Kick client devices that the signal (RSSI) is above the set value from the AP for reducing the interference and optimize the connecting quality |
Optimize Performance | |
Quality of Service |
Compliance with IEEE 802.11e standard Prioritizes voice over data for both tagged and untagged traffic Transmit video, voice and data at the same SSID |
Power Save Mode | Support U-APSD |
Pre-Authentication | Compliance with 802.11i & 11x |
PMK Caching | Compliance with 802.11i - If wireless client devices has authenticated to an access point, it does not perform a full authentication exchange when client devices roaming between access points. |
Fast Roaming (802.11r) | Use a Fast Transition key to handover between Access Points (ENS500EXT-ACV2) |
Multicast to Unicast Conversion | Using the IGMP protocol, an access Point delivers high definition content to a large number of clients simultaneously |
Management | |
Multiple SSIDs |
BSSID support EnJet Enable: Support 1 SSID for EnJet linkage and 1 SSID for CSMA client to configure EnJet AP EnJet Disable: Support 8 SSIDs for CSMA client |
Guest Network | Isolate each client for avoiding an unnecessary touch, leaking sensitive data, and enhancing Internet security and reliability |
VLAN Tag | Independent VLAN setting can be enable or disable. Any packets that enter the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID) |
VLAN Pass-through | Broadcast VLAN-tag packets to find the destination and deliver packets over the defined path. The functions allows network topology scalable and flexible |
VLAN Per SSID | Integrate VLAN ID with a SSID interface to forward packets over the defined path. The functions isolate client devices to get more security |
VLAN Management | Feature is enabled with specified VLAN ID, the device will only allow management access with the same specified VLAN ID from remotely location by using protocols such as telnet, SSH, snmp, syslog etc |
Traffic Shaping | Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point |
MAC Address Filtering | Filter up to 32 sets MAC addresses per SSID |
E-Mail Alert | Provides a network monitoring tool for administrators to stay informed the configuration change |
Save Configuration as Users Default | Save the customized configuration as default value for different customer demands |
Wi-Fi Scheduler | Perform a regular reboot on access point at assigned schedule. Perform it to enable or disable 2.4GHz or 5GHz interface from a period time. |
SNMP & MIB&CLI |
v1/v2c/v3 support MIB I/II, Private MIB CLI Supported |
RADIUS Accounting | Help operators to offload 3G to Wi-Fi seamlessly |
Wireless Clients list | Provide the list to display real status of wireless client devices on this Access Point |
Comprehensive Protection | |
Wireless Encryption Standard | WPA2-AES PSK, WPA2 Enterprise |
Hide SSID in beacons | Supported |
Client Isolation | Block/Isolate the communication between the associated clients under the same WLAN |
HTTPS | A secure communication protocol can be enabled to allow secure management web access over a computer network |
SSH Tunnel | A secure communication protocol can be enabled to allow secure remote shell access or command execution |
Mechanical & Environment | |
Dimensions (Device only) | 186mm (L) x 100mm (W) x 29mm (H) (7.54” x 4.49” x 1.88”) |
Weight | 504g (1.11 lbs) |
Operating Environment |
Temperature: -20°C~60°C (-4°F~140°F) Humidity: 0%~90% typical |
Storage Environment |
Temperature: -40°C~80°C (-22°F~176°F) Humidity: 0%~90% typical |
Environment Protection Level | IP55 |
Surge Protection |
Line to Line: 1.0KV Line to Ground: 2.0KV |
ESD Protection |
Contact: 4KV Air: 8KV |
Mounting | |
Pole Mounting | Assemble a mounting bracket to fix this Access Point on a pole |
Wall Mounting | Mount this Access Point on a flat wall |
Compliance Regulatory | |
FCC |
Subpart 15 B Subpart E 15.407 |
CE |
EN 301 893 EN 301 489-1/-17 EN 50385 EN 55032 EN 55024 EN 60950-1/-22 IEC 60529 |
ENS500-AC vs. ENS500EXT-AC
Below is a quick comparison table between the two EnGenius Access Points.
|
ENS500-Acv2 | ENS500EXT-Acv2 |
---|---|---|
Standards | 802.11ac/a/n | 802.11ac/a/n |
Frequency | 5150MHz~5850MHz | 5150MHz~5850MHz |
Data Rates | 867 Mbps | 867 Mbps |
Antennas | Directional 14dBi Internal | External SMA 5dBi |
Physical Interface | 2 x Gigabit LAN | 2 x Gigabit LAN |
Radio Chains/Streams NOTE: * The supported frequency and maximum Tx power will be varied by the local regulatory. |
2x2: 2 | 2x2: 2 |
How & Where to Buy?
To buy the ENS500-AC Outdoor Long Range AP, you can drop by our store located at Novatel Communications, 12 Main St, Buttevant, Co. Cork, P51 K066, Ireland.
To order online, simply click on the Add to Cart button, and then go through the fast, easy and secure checkout process. Payment is provided for your convenience via Authipay Payment Gateway. You can use any supported (MasterCard, Visa, American Express, Diners, etc).
How Will My Order Be Delivered?
Your order(s) will be shipped via express delivery and are normally delivered within 1-4 business days. Your order will be dispatched directly from our warehouse and you will be provided a tracking information for your order, after it is dispatched. If you have any questions on your order status, please contact us.