EnGenius ENS500EXT-AC - 5GHz AC867 Wave2 11ac Outdoor Wireless Access Point

Name: EnGenius ENS500EXT-AC - 5GHz AC867 Wave2 11ac Outdoor Wireless Access Point
Brand: EnGenius
Price: 167.00 EUR
Availability: InStock

Hot

Based on 0 reviews. - Write a review

€167.00

Ex Tax: €135.77

Stock: In Stock
Brand: EnGenius
Model: ENS500EXT-AC
Weight: 0.70kg
Dimensions: 23.20cm x 10.30cm x 12.40cm
EAN: 4713361934599
MPN: 1102A1250301

Qty

Add to Cart

Add to Wish List

Description
Reviews

The EnGenius ENS500EXT-AC is an 802.11ac long range outdoor wireless access point that you can use for any bandwidth and speed demanding applications like HD video streaming or IP-based surveillance system. It is Capable of up to 867Mbps speed under the 5GHz frequency band. It has detachable antennas, which you can switch to a more robust and higher gain antenna system like the Poynting directional or omnidirectional Wi-Fi antennas.

Features

Up to 867Mbps 5GHz speed performance
2x2 802.11ac Wave2 (MU-MIMO) equipped.
Inbuilt high gain directional antenna 14dBi antena
Safe & Robust IP55 enclosure for extreme weather deployment
Easy Access Point reset via PoE Adapter (100 meters or 328 feet)
Equipped with 802.11ac Wave2 engine to enhance overall bandwidth/speed
Send/Receive Multiple HD quality IP surveillance content over wireless transmission
Easy monitoring & device configuration on smartphone/tablet, thanks to EnGenius’ "EnWiF:” device management system

Deployment Scenarios

Below are few scenarios/applications where you can use the ENS500EXT-AC in your outdoor wireless distribution projects.

Shopping Malls
Building Sites
College Campuses
Stadiums & Arena
Public Lightings
Airport Terminals
Resort Properties
Construction Sites
Hospital Buildings
SmartHomes Project
Parks & Campgrounds
Warehouse Operations
…and more

ENS500EXT-AC Technical Specification

Wireless Radio Specification
Access Point Type	Outdoor, IP55, dual radios concurrent, 5GHz 802.11 ac, 2x2 MIMO is backwards compatible with 802.11 ac/a/n mode
SU-MIMO	Two (2) spatial stream SU-MIMO for up to 867 Mbps wireless data rate to a single wireless client device
MU-MIMO	Two (2) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two (2) wireless client devices simultaneously
Frequency Radios	5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz Note: The range of frequencies your device can operate on might differ based on the specific regulations of the country or area you’re in. Specifically for Ireland, if you intend to use this Access Point (AP) within the 5.8GHz frequency band, you must adhere to the regulations set forth by ComReg.
Supported Radio Technology	802.11n/ac: 2x2 MIMO with 2 streams 802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz 802.11n supports high throughput (HT) — HT 20/40 MHz 802.11n/ac packet aggregation: AMPDU, ASPDU Orthogonal frequency-division multiplexing (OFDM) under 802.11ac/a/n EnJet technology with Time Division Multiple Access (TDMA) under 802.11ac/n
Supported Modulation Type	802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit Power (Maximum Value)	26dBm (Maximum power is limited by regulatory domain)
Tx Beamforming (TxBF)	Increasing signal reliability and transmitting distance
Supported Data Rates (Mbps)	802.11a: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2)
Antenna
Antenna Types	Two (2) Detachable 5.0dBi SMA Antennas Widely frequency supported from 5150MHz to 5925MHz
Interfaces
Networking Interface	Two (2) 10/100/1000 BASE-T RJ-45 Ethernet Ports
LED Indicators	Display system and wireless transmission status
Reset Button	Convert Access Point to the Factory default or the Users Default
Power
Maximum Power Consumption	Maximum 8.93W
Power Source	Proprietary 24V PoE (Power: 4, 5; Return: 7, 8) Active Ethernet (Power Over Ethernet, PoE)
Operating Mode
Access Point Mode (AP Mode)	Be an Access Point behaves like a central connection for station or clients that support IEEE 802.11 ac/a/n network
Client Bridge Mode (CB Mode)	The Access Point essentially acts as a wireless adapter that connects to an access point to allow a system of wireless access to the network in the client bridge mode
WDS Modes (WDS AP, WDS Station)	WDS modes uses WDS technology to establish the wireless connection via filling MAC address in both Access Points to enlarge the wireless area
Exquisite RF Management
ACK timeout (Distance Control)	Set the ACK timeout to assure the proper distance to deliver wireless signal properly
Site Survey	Scan signal level of an environment to provide parameters for performing Auto Transmit power and auto channel
Auto Transmit Power	Automatically adjust power level
Auto Channel	Automatically assign a clearly channel to perform RF transmission under a pervasive environment
RSSI Threshold	Kick client devices that the signal (RSSI) is above the set value from the AP for reducing the interference and optimize the connecting quality
Optimize Performance
Quality of Service	Compliance with IEEE 802.11e standard Prioritizes voice over data for both tagged and untagged traffic Transmit video, voice and data at the same SSID
Power Save Mode	Support U-APSD
Pre-Authentication	Compliance with 802.11i & 11x
PMK Caching	Compliance with 802.11i - If wireless client devices has authenticated to an access point, it does not perform a full authentication exchange when client devices roaming between access points.
Fast Roaming (802.11r)	Use a Fast Transition key to handover between Access Points (ENS500EXT-ACV2)
Multicast to Unicast Conversion	Using the IGMP protocol, an access Point delivers high definition content to a large number of clients simultaneously
Management
Multiple SSIDs	BSSID support EnJet Enable: Support 1 SSID for EnJet linkage and 1 SSID for CSMA client to configure EnJet AP EnJet Disable: Support 8 SSIDs for CSMA client
Guest Network	Isolate each client for avoiding an unnecessary touch, leaking sensitive data, and enhancing Internet security and reliability
VLAN Tag	Independent VLAN setting can be enable or disable. Any packets that enter the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID)
VLAN Pass-through	Broadcast VLAN-tag packets to find the destination and deliver packets over the defined path. The functions allows network topology scalable and flexible
VLAN Per SSID	Integrate VLAN ID with a SSID interface to forward packets over the defined path. The functions isolate client devices to get more security
VLAN Management	Feature is enabled with specified VLAN ID, the device will only allow management access with the same specified VLAN ID from remotely location by using protocols such as telnet, SSH, snmp, syslog etc
Traffic Shaping	Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point
MAC Address Filtering	Filter up to 32 sets MAC addresses per SSID
E-Mail Alert	Provides a network monitoring tool for administrators to stay informed the configuration change
Save Configuration as Users Default	Save the customized configuration as default value for different customer demands
Wi-Fi Scheduler	Perform a regular reboot on access point at assigned schedule. Perform it to enable or disable 2.4GHz or 5GHz interface from a period time.
SNMP & MIB&CLI	v1/v2c/v3 support MIB I/II, Private MIB CLI Supported
RADIUS Accounting	Help operators to offload 3G to Wi-Fi seamlessly
Wireless Clients list	Provide the list to display real status of wireless client devices on this Access Point
Comprehensive Protection
Wireless Encryption Standard	WPA2-AES PSK, WPA2 Enterprise
Hide SSID in beacons	Supported
Client Isolation	Block/Isolate the communication between the associated clients under the same WLAN
HTTPS	A secure communication protocol can be enabled to allow secure management web access over a computer network
SSH Tunnel	A secure communication protocol can be enabled to allow secure remote shell access or command execution
Mechanical & Environment
Dimensions (Device only)	186mm (L) x 100mm (W) x 29mm (H) (7.54” x 4.49” x 1.88”)
Weight	504g (1.11 lbs)
Operating Environment	Temperature: -20°C~60°C (-4°F~140°F) Humidity: 0%~90% typical
Storage Environment	Temperature: -40°C~80°C (-22°F~176°F) Humidity: 0%~90% typical
Environment Protection Level	IP55
Surge Protection	Line to Line: 1.0KV Line to Ground: 2.0KV
ESD Protection	Contact: 4KV Air: 8KV
Mounting
Pole Mounting	Assemble a mounting bracket to fix this Access Point on a pole
Wall Mounting	Mount this Access Point on a flat wall
Compliance Regulatory
FCC	Subpart 15 B Subpart E 15.407
CE	EN 301 893 EN 301 489-1/-17 EN 50385 EN 55032 EN 55024 EN 60950-1/-22 IEC 60529

Downloads

Tech Specs

How & Where to Buy?

To buy the ENS500EXT-AC Long Range Outdoor AP, you can drop by our store located at Novatel Communications, 12 Main St, Buttevant, Co. Cork, P51 K066, Ireland.

To order online, simply click on the Add to Cart button, and then go through the fast, easy and secure checkout process. Payment is provided for your convenience via Authipay Payment Gateway. You can use any supported (MasterCard, Visa, American Express, Diners, etc).

How Will My Order Be Delivered?

Your order(s) will be shipped via express delivery and are normally delivered within 1-4 business days. Your order will be dispatched directly from our warehouse and you will be provided a tracking information for your order, after it is dispatched. If you have any questions on your order status, please contact us.