StellaDoradus SD-GDW-O-4P StellaDoradus Repeater Kit Calls/SMS,3G/4G (LTE) Mobile Signal Booster For Marine Vessels
Triple Band: 900MHz / 1800MHz / 2100MHz Frequency Band(s) Support.
The SD-RP1002-GDW-O-4P repeater system boosts mobile signal for 4G (LTE-1800Mhz), 3G, and voice calls. This remarkable system was designed and made to bring the amplified mobile signal to any ships, boats, yachts, etc. It can cover an area of 4000M2. This model when compared to the "SD-RP1002-GDW-O" system, is almost the same, when it comes to signal coverage and appearance. Both models supports 4G (LTE) at 1800MHz frequency, and also for GSM Voice and 3G Data. The very obvious thing present in this model that is not on the SD-RP1002-GDW-O is the 4-port indoor antenna connector. That said, this system is more capable of covering a larger area of a ship, like on a multi-deck/storey ships or huge cruise liner.
The indoor antenna serves as a mini cellphone tower or base station inside the ship. It transmits the amplified mobile signal coming from the repeater system. Each indoor antenna, theoretically, can cover an open area of 1,000 square meters.
- Networks: GSM, 3G, and 4G (LTE-1800Mhz)
- Frequency: 900Mhz, 1800Mhz, 2100Mhz
- Coverage: 4000m2 of open space (up to 10-rooms)
- Boosts: All mobile network operators
- Certification: CE certified and RoHS
- No need for an existing broadband connection
- Unlimited number of calls/data sessions at the same time
- Complete operator network protection
- Legal to use in Ireland
How The Ship Repeater Works
The SD-RP1002-GDW-O-4P MarineBoost 3.4 (3 bands 4 port) mobile phone signal booster for ships, is ideal for large ships, boats, and yachts. The high-gain omnidirectional antenna is installed high up on the ship to receive the signal in all directions. SD400 low-loss coaxial cable runs from this antenna (the receiver antenna) down inside the ship to where the repeater is located.
Four interior panel antennas are connected to the repeater and can be placed in four separate locations inside the ship. One antenna is connected directly to the repeater for coverage in that location. The other three antennas can be extended to other locations within the ship using the supplied 3 X 15m cables (SD240).
These three cables are narrower and are easy to install.
Total internal coverage: 4 X 1000m2 = 4000m2.
The repeater is then plugged in. That’s the installation done.
When your ship passes within ~30Km of any mobile tower on the land, the booster system will receive this signal and amplify it into the four areas of your ship, boats or yachts.
The Signal Repeater Kit Includes
- The SD-RP1002-GDW-O-4P (4-Port) Device
- Indoor Antennas (x4 Transmitter Antenna)
- Outdoor Antenna (receiver antenna)
- 15m SD240 Cable (x4)
- 15m SD400 Cable (1x)
- Power Supply
|MarineBoost GDW-4 (SD-RP1002-GDW-O-4P) Repeater|
|Frequency Bands (MHz)||(880-960) + (1710-1880) + (1920-2170)|
|Signal Coverage||4000m2 (open space)|
|Number of People||Unlimited|
|Gain||Uplink Gp > 50dB Downlink Gp> 60dB|
|Pass Band Ripple||4dB|
|I/O Impedance||50 ohm/SMA female connector|
|Max Uplink/Downlink Signal Strength||17dBm / 10dBm|
|Ambient Temperature||-30°C to +70°C|
|Power Supply Input||110 - 240V AC|
|Power Supply Output||12v DC|
|Uplink Switch Off||Yes**|
|Surge Protection||SMA connectors DC grounded 12V DC port MOV protected|
|Indoor Antenna||Outdoor Antenna|
|Nominal Gain||6.4dBi / 9.4dBi||4.5dBi / 5dBi|
|3dB Beam Pattern||60° x 60°||38° / 35° omni|
|Bandwidth||790-960MHz + 1710-2700MHz||790-960MHz + 1710-2700MHz|
|Front-to-Back Ratio||> 20dB||> 20dB|
|Cross Pol. Discrimination||-20dB||-20dB|
|Dimensions||210 x 180 x 43mm||365 x 33mm|
|Rated Wind Velocity||126km/hour||216km/hour|
|Working Temperature||-40°C to +65°C||-40°C to +65°C|
|Power Supply Specification|
|DC Input||12V 2.2A|
|Typical Power Usage||26W|
|Mounting||6 x 5mm holes for mounting|
Note, Items with * or ** mean the following:
- * - Automatically adjusts during installation. Thereafter, automatically adjusts for seasonal variation in path loss between Basestation and Outdoor Antenna.
- ** - The uplink amplifiers switch off when the repeater is not in use, thus, reducing the uplink noise to almost zero. When the repeater is in use (eg: phone call being made), the uplink amplifier switches on for the duration of the call and a blue LED switches on, indicating this is the case.
Note: Specifications are subject to change without prior notice.
Where to Buy This Tri-Band Mobile Signal Booster For Ships?
You can buy the system by simply adding it to your cart and going through the secure and fast checkout process. You can pay using any credit card supported by Stripe Payment Gateway.
You may also call us to order by dialing the number below.
Contact: +353 222 3440.
How Will My Order Be Delivered?
All orders are shipped via express delivery and are normally delivered within 1-4 business days. Your order will be dispatched directly from our warehouse and you will be provided tracking information for your order after it is dispatched. If you have any questions about your order status, please contact us.