Signal Repeater Kit for Voice/SMS, LTE and 3G Data – RP-LGDWH (800MHz / 900MHz / 1800MHz / 2100MHz / 2600MHz)
Trade Price Available
If you're asking how to boost your cell phone signal for GSM and all 4G/LTE bands, then you came to the right place on the Internet. Here at Novatel Communications, you can buy the best booster for all networks in Ireland. Vodafone, EIR/Meteor, Three, you name it! All these networks are supported, and you can improve your mobile phone signal legally in Ireland. How? By installing one of StellaDoradus' signal repeater kit for GSM, 3G and 4G/LTE.
The SD-RP1002-LGDWH is a quint-band multi-purpose signal booster kit, or shall I say signal repeater kit, that can boost 4G/LTE signal, 3G & GSM Voice signal all at the same time. Yes, you heard me right! All the the same time. Thanks to SD's state-of-the-art design and manufacturing process, they were able to produce a high-quality device that can improve signal reception for your precious mobile phones and other smart mobile devices.
This remarkable booster device supports 4G (LTE) under 800 (Band 20), 1800 (Band 3), and 2600MHz (will be used in the near future) frequency band. Most mobile network operators here in Ireland transmits LTE signal either at 800Mhz or 1800Mhz, and this device will work on these frequency band without issues. You don't have to test or know what LTE signal you're are receiving in your area, because all frequencies are supported and can be boosted with the use of this repeater kit.
NOTE: Checkout SD-RP1002-LGDWH-4P if you're looking to boost signal in large areas like multi-storey buildings.
StellaDoradus SD-RP1002-LGDWH: A 5-Band Signal Repeater for Homes and Offices
- 5 Band Signal Repeater: Boosts 800,900,1800,2100 and 2600Mhz
- Provides coverage for GSM, 3G and 4G
- Designed & Manufactured in Ireland
- Legal and fully EU compliant
- Boosts all mobile operators (use it as Vodafone Signal Booster, also works with 3, Meteor, Tesco and all networks in Ireland, Europe and the rest of the world.)
- Comes as Kit, Everything included for complete installation
- Can cover up to ~4 rooms
- No SIM Card required, no extra bills
What's In The Box
This product comes ask kit, in the box you'll fine the signal amplifier, two panel antennas - one for indoor (transmitter antenna) and one for outdoor (receiver antenna), cable set for connecting the antennas, power supply and user's manual.
How It Works?
The SD-RP1002-LGDWH is ideal for providing strong GSM and 4G/LTE signal, as well as 3G signal coverage in your home or small office. Take note that there is no limit to the number of people who can use the repeater at the same time. It's possible that one phone is making a call through the repeater (i.e. Vodafone), while another device on a different network (i.e. Three), is also making a call or surfing the Internet. But do take note, all these are possible, only with this specific model. Other model that can do these is the SD-RP1002-LGDWH-4, which is capable of covering a larger area.
As long as there is signal outside your house/office, this device can amplify the signal and re-transmit the signal throughout your house or any target area. It can cover around 4 rooms.
For the repeater to work your cellphone must have at least 1 bar signal outside your house on your phone.
The SD-RP1002-LGDWH once installed, will receive the weak signal from your favourite mobile network. Then it takes in the signal to the booster device through the coaxial cable. Then signal will be filtered, boosted and then re-transmit to your target area, already amplified. The boosted signal will not cause any interference with other network on the same frequency band. Unlike those cheap Chinese-made signal booster which are sold on the Internet.
Those cheap boosters will cause interference to legitimate user of the frequency and can cause damage to their network. You can be penalized when found guilty of using illegal boosters.
The SD-RP1002-LGDWH and other StellaDoradus kits are ComReg approved - which means, they are all permitted and legal to use in Ireland, UK and Europe.
How To Install The StellaDoradus SD-RP1002-LGDWH
To install the SD-RP1002-LGDWH booster kit, follow the simple steps below.
Note: The unit used in the video demo is not the actual SD-RP1002-LGDWH model.
- Install the outdoor antenna in a place where you know you have reasonable signal, like your roof or mast.
- Run the cable down inside your house to the booster device and connect it. A 12 meter cable length should be the maximum for optimal performance.
- Attach the outdoor antenna cable the indoor panel antenna to the repeater.
- Plug in the power to the booster device.
- You're done!
There are smartphone apps available that you can use to exactly point your receiver antenna to the nearest network operator's mast.
We recommend the OpenSignal app for both iPhone and Android.
NOTE: The external receiver antenna has an LED light signal strength indicator. Please refer to the YouTube below on how to use.
How To Buy?
To buy the SD-RP1002-LGDWH mobile phone signal booster, you can call us to order using this number +353 22 23440 or use the "Add to Cart" button on this page and go through the secured checkout process.
You can pay using your Credit Card via the Secured Stripe Payment Gateway.
How Will My Order Be Delivered?
All orders are shipped via express delivery and are normally delivered within 1-4 business days. Your order will be dispatched directly from our warehouse and you will be provided a tracking information for your order, after it is dispatched. If you have any questions on your order status, please contact us.
If all 6 (1-6) green LEDs all lit up, the signal from the indoor antenna will be able to cover 30mx30m of open space.The omni-directional ceiling mount antenna on the other hand, is able to cover a radius of 17m.
With the omnidirectional antenna, signal passes through non-metal doors. It is not possible to pass through a solid wall. However, it will bounce off the walls and pass through the doors.
So, if you have a 2-3 storey house, with solid internal walls and a concrete ceiling between the floors, then you will need a 4-port repeater (Office Repeater). Office Style Repeters comes with 4 individually amplified internal antennas and is better suited for this type of house. It is also more suitable for offices.
However, this is only in open space. In practice, it equates to about 4 sized rooms in a typical building layout. The coverage depends on the type of walls inside your building.
Concrete or metal insulated walls will reduce the coverage, whereas plaster board walls and wide open internal spaces allow an increase in coverage.
See Reference Image Below: Building A and building B
All the walls are concrete block and the doors are wooden.
Building A: In this building, we can get away with using only one antenna. The signal will pass through the doors to the three smaller rooms.
Building B: This building has a corridor separating the rooms. To achieve maximum coverage with only one antenna, we place the antenna in the corridor as shown. Notice the reduction of signal in all the rooms. Interior concrete block walls reduce coverage significantly. If you require more reliable coverage in the rooms, you will need more antennas. More antenna would mean more antenna ports are needed. If so, the we recommend the Office Repeater in this case.