Your Cart

Teltonika RUTX11 Router (Refurbished)

Teltonika RUTX11 Router (Refurbished)
Teltonika RUTX11 Router (Refurbished)
Teltonika RUTX11 Router (Refurbished)
Teltonika RUTX11 Router (Refurbished)
Teltonika RUTX11 Router (Refurbished)
€4.88 Local IE Flat Rate Shipping (€6 w/ VAT)
Ex Tax: €267.07
  • Stock: In Stock
  • Brand: Teltonika Networks
  • Model: RFRB-RUTX11
  • Weight: 936.00g
  • Dimensions: 175.00mm x 355.00mm x 60.00mm
  • MPN: RUTX11

RUTX11 has great useful features that you'll love. If features; Dual-SIM w/ auto Failover, LTE Cat 6, Gigabit Ethernet, WPA2-Enterprise WiFi Connectivity & VPN. For advance users who wants to know whether this model supports Carrier Aggregation, the answer is yes, it does CA. It can support 2 Carrier Aggregation (2CA), and can do all the types of; Intra-band contiguous, intra-band non-contiguous and inter-band non-contiguous.

X11 vs. X09

Here's a quick comparison table between the two router models.

Dual-SIM with auto Failover Supported Supported
LTE Max Speed CAT6 LTE Speed (up to 300 Mbps) CAT6 LTE Speed (up to 300 Mbps)
WiFi Capability Dual Band with speeds up to 867Mbps
Location Tracking GPS, GLONASS, BeiDou, Galileo and QZSS GPS, GLONASS, BeiDou, Galileo and QZSS
Ethernet Ports 1 x 10/100/1000 Mbps WAN Port
(Can be configured to LAN, compliant w/ IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover)

3 x 10/100/1000 Mbps LAN ports
(compliant w/ IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover)
1 x 10/100/1000 Mbps WAN Port
(Can be configured to LAN, compliant w/ IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover)

3 x 10/100/1000 Mbps LAN ports
(compliant w/ IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover)
DDNS Supported 25+ service providers, others can be configured manually Supported 25+ service providers, others can be configured manually
VPN OpenVPN Supported
Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Supported
Multiple clients and a server can run simultaneously, 12 encryption methods
USB USB 2.0 For Samba Sharing USB 2.0 For Samba Sharing
Please read their full technical specification on their designated product page.

It's a Router that Can Handle CAT 6 LTE Speed, with VPN, WiFi, VPN & Location Tracking Capabilty

The RUTX11 has the most features when compared among RUTX series routers. If you're looking for speed and robustness then this device is one of the best for you. It can handle LTE speed of up to 300MBps and equipped with fast 4-Gigabit Ethernet Ports which let you experience seamless data transfer.

This device is powered by a Quad-core ARM Cortex A7 717 MHz CPU with 256MB DDR3 RAM, which ensures smooth VPN and highly secured WPA2-Enterprise Wifi connection that can handle multiple concurrent users smoothly.

The VPN feature can function as an OpenVPN Server or Client, or can be both (For example, you can hook it up with a 3rd-party VPN service like NordVPN and set it as client & at the same time as a server for local machines within your LAN). It can be used in a secured remote CCTV camera viewing, access and administration. Other VPN protocols it can support are; IPSec, PPTP, and L2TP.

The DDNS feature

If you need to access a device/host (hosting a service) within your local area network via the Internet using your dynamic public IP address, then you definitely need the DDNS feature.

The DDNS service periodically updates your public IP address and dynamically binds it to your chosen custom domain name or hostname, making sure that the device remains reachable via the same hostname even in cases when its IP address has changed: happens when you're subscribed without a dedicated static IP address from your ISP.

Please click here for a full feature list and technical specification for this device.

Supported Bands

It supports all known LTE frequency bands here in Ireland, Europe and the rest of the world. Works on EIR, 3 (Three), Meteor, Vodafone, Testco and etc.

Bands supported are; 800MHz, 1800MHz, 2600MHz.

Summary of Features

  • Dual-SIM with auto Failover, Backup WAN and other SW features
  • Dual Band WiFi with speeds up to 867Mbps (Wave-2 802.11ac)
  • LTE Cat 6 with speeds up to 300 Mbps
  • Gigabit Ethernet with speeds up to 1000 Mbps
  • Teltonika Remote Management System compatible
  • RutOS: easy to use, secure and feature rich Operating System

Use Cases

  • Public Transport: Teltonika provides an amazing solution for public transport which enables to integrate modern digital pay systems into city public transport. WiFi connection service serves as an added value to the passengers.

  • Energy Sector: Nowadays, when the whole world is trying to solve pollution problems, many households are using wireless technologies to modernize traditional energy infrastructure and create “smart grids”. Teltonika provides networking solutions for smart metering which is one of the most important elements in the smart grid infrastructure.

  • Vehicle Height Laser Detection System: Transport for Cape Town (TCT) recently installed a 3D laser detection system in Muizenberg to prevent vehicles with a height of over 2.5m from crashing into the low railway bridge at Atlantic Road. In this solution RUT955 ensures reliable and secure remote monitoring from the Transport Management Centre.

Other Use Case & Application

  • VPN Setup (as a server or as a client)
  • Traffic lights monitoring
  • Building and Construction Site Security
  • WiFi access in public transportation
  • Electricity Meters
  • Location Tracking/Vehicle Tracking (using GNSS Feature)
  • Surveillance Systems
  • Heavy Duty Machinery
  • Remote IP camera access
  • Managed Print Services
  • Internet when caravanning or camping

RUTX11 Technical Specifications

Mobile module 4G (LTE): Cat 6 up to 300 Mbps, 3G: Up to 42 Mbps
SIM switch (planed) 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET (planed), EMAIL to SMS (planed), SMS to Email (planed), SMS to HTTP (planed), SMS to SMS (planed), scheduled SMS (planed), SMS autoreply (planed), SMPP (planed)
Black/White list Operator black/white list
Multiple PDN (planed) Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
Wireless mode 802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi security WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID ESSID stealth mode
WAN 1 x WAN port (can be configured to LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Bluetooth LE Bluetooth low energy (LE) for short range communication
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
NetSnapper (optional) Mobile connection management, data compression VPN client (not available in standard FW)
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forwards, traffic rules, custom rules
DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
QoS Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup VRRP (planed), Mobile and Wired WAN options, each of which can be used as backup, using automatic Failover
Load balancing Balance your Internet traffic over multiple WAN connections
SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)
Authetication Pre-shared key, digital certificates, X.509 certificates
Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port based and tag based VLAN separation
Mobile quota control Set up custom data limits for both SIM cards
WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter
OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
IPsec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE GRE tunnel
PPTP, L2TP Client/Server services can run simultaneously
Stunnel (planed) Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN Method of building scalable IPsec VPNs
WEB UI HTTP, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA Firmware update from server, automatic notification
SSH SSH (v1, v2)
SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
TR-069 (planed) OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
SNMP SNMP (v1, v2, v3), SNMP trap
Modbus (planed) Modbus TCP status/control, master and slave modes
MQTT MQTT Broker, MQTT publisher
RMS Teltonika Remote Management System (RMS)
CPU Quad-core ARM Cortex A7, 717 MHz
RAM 256 MB, DDR3
FLASH memory 256 MB SPI Flash
WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA Update FW/configuration from server
RMS Update FW/configuration for multiple devices
Keep settings Update FW without losing current configuration
Operating system RutOS (OpenWrt based Linux OS)
Supported languages Busybox shell, Lua, C, C++
Development tools SDK package with build environment provided (planed)
GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
Server software Supported server software: TAVL, RMS
Mobile Network Geolocation Get approximate device location on RMS based on mobile cell tower position (without using GPS)
Geofencing Configurable multiple geofence zones
Data rate USB 2.0
Applications Samba share (planed), custom scripts (planed)
External devices Possibility to connect external HDD, flash drive, additional modem, printer
Storage formats FAT, FAT32, NTFS
Input 1 x Digital Input
Output 1 x Digital Output
Events SMS, Email, RMS
Connector 4 pin industrial DC power socket
Input voltage range 9: 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive) Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards
Power consumption 11 W Max
Ethernet 4 x RJ45 ports, 10/100/1000 Mbps
I/Os 1 Digital Input, 1 Digital Output on 4 pin power connector
Status LEDs 3 x connection status LEDs, 5 x connection strength LEDs, 8 x LAN status LEDs, 3 x WAN status LEDs, 1 x Power LED
SIM 2 x SIM slots (Mini SIM: 2FF), 1.8 V/3 V, external SIM holders
Power 4 pin DC connector
Antennas 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
USB USB A port for external devices
Reset Factory reset button
Casing material Full aluminium housing
Dimensions 115 mm x 95 mm x 44 mm (H x W x D)
Weight 456 g
Mounting options DIN rail (can be mounted on two sides), flat surface placement
Operating temperature -40 C to 75 C
Operating humidity 10 % to 90 % non-condensing
Ingress Protection Rating IP30

What's in the Box

RUTX11 Quick Start YouTube Video

Standard Package Contains:

  • Router RUTX11
  • Euro PSU
  • 2 x LTE antennas (swivel, SMA male)
  • 2 x WiFi antennas (swivel, RP-SMA male)
  • 1 x GNSS antenna (adhesive, SMA Male)
  • 1 x Bluetooth antenna (magnetic, RP-SMA male)
  • Ethernet cable (1.5 m)
  • QSG (Quick Start Guide)

RUTX11 Default Login Details

Below, are the login information for the router. It is strongly recommended that you change them as soon as you logged in to the web gui.

  • Default Address (LAN IP): 192.168. 1.1
  • Default Username: admin
  • Default Password: admin01

Where and How To Buy

To buy the Teltonika RUTX11 Dual SIM LTE Router, simply add it to your cart by clicking on the "Add to Card" button. Another way is through phone ordering. Order the router by phone, call +353 222 3440. If you're somewhere near Main Street, Buttevant, Co. Cork P51 K066, then you can walk-in to our physical store and purchase from there on.

In case you would want to improve your LTE signal reception in your area with this device, then please visit our mobile signal repeater page for more details.

Or if you want to enhance your signal reception passively, without using any sort of signal booster kit, then you could buy a compatible 3rd-party SMA-type external antenna from Poynting Tech.

Write a review

Please login or register to review