Poynting XPOL-2-5G: 11dBi WiFi/4G/5G Cross Polarised MIMO Outdoor Antenna - Main


- Stock: In Stock
- Brand: Poynting
- Model: XPOL-2-V3-5G
- Weight: 1.98kg
- Dimensions: 37.50cm x 26.70cm x 9.80cm
- EAN: 6009880915750
- MPN: A-XPOL-0002-V3
Available Options
It works on Wi-Fi and cellular frequency bands. It is Poynting’s third generation breed of the well-known cross-polarised MIMO antenna - the XPOL-2-5G.
Use this easy-to-install unidirectional outdoor panel antenna to transmit & receive WiFi, or passively boost 4G, and 5G signal reception without interruption or delay. It is suitable for houses in urban as well as rural areas. You can use it to get high internet speeds even in factories and industrial settings. Its advanced metamaterial technology makes it capable of providing exceptional performance over the main 4G/5G bands and a very high gain for its size.
Quick Features
You can read the full technical data sheet on this section.
- 2-3db Higher Gain
- Lightweight & Rugged
- Wall or Pole Mountable
- Weatherproof & waterproof (IP65)
- Consistent Broadband Performance
- New 3400mhz-3800mhz, 5G Bandwidth 11dbi Gain
- High-pattern Consistency Across Bands For 4G/5G Carrier Aggregation
- 2 Cross-Polarised Antennas In One Enclosure For Optimal Performance

Use Cases & Applications
- Municipal & Government Systems
- Oil & Gas Communication Systems
- Consumer LTE/5G Internet Connectivity
- Power, Energy & Water Telemetry Access
- Industrial & Commercial LTE/5G deployments
- Repeaters & Coverage Enhancement Amplifiers
- Agricultural & Farming LTE/5G data distribution
- Outdoor antenna for Fixed Wireless Access (FWA)
- Urban & Rural Household Signal Reception Enhancement
Why XPOL-2-5G?
Essentially, these are the reasons why you would want to own this remarkable cellular antenna.
More MBs Per Second
With an 11 dBi gain across all kinds of outdoor and indoor environments, it can support higher internet speeds and provide you with a seamless and fast internet connection.
4G LTE and 5G Supported
It includes two cross-polarised antennas in a single enclosure to make sure that you can enjoy optimal LTE and 5G performance at your location.
Weather, Dust, and Vandal-resistant Enclosure
It can stand harsh weather conditions and is suitable for use both outdoors and indoors. With its IP65 certification for safety from weather, dust, and vandalism, it can definitely provide uninterrupted signals under all circumstances.
Heat and Cold Resistance
Poynting XPOL-2-V3-5G can stand temperatures as low as -40 degrees Celsius and as high as +80 degrees Celsius. It is perfect for all climates.
Wind Survival
The antennae can survive winds speeds up to 250 km/hour. With the Z-bracket included, it can survive wind speeds up to 160 km/hour. With an optional bracket BRKT-030, you can increase its bracket’s wind survival to 250 km/hour as well.
Waterproof
Thunderstorms and torrential rain will never cause any problems with your internet – this unidirectional antenna can handle exposure to water as well.
Technical Specification
Below table is the full technical specifications of the XPOL-2-V3-5G antenna, also known as XPOL-2-5G.
Electrical Specifications - Cellular | |
Frequency Bands |
698-960 MHz 1710-2700 MHz 3400-3800 MHz |
Gain (max) Port 1 & 2 | 11 dBi |
VSWR Port 1 & 2 |
≤1.5.1 over 95% of the band |
Feed Power Handling | 20W |
Input Impedance | 50 Ohm (nominal) |
Polarisation | ±45° |
Coax Cable Loss |
0.35 dB/m @ 900 MHz 0.53 dB/m @ 2000 MHz 0.6 dB/m @ 2500 MHz 0.66dB/m @ 3500 MHz |
DC Short | Path to ground |
Mechanical Specifications | |
Product Dimensions | 255mm x 255 mm x 80 mm |
Packaged Dimensions | 290 mm x 276mm x 98mm |
Weight | 1,55 kg |
Packaged Weight | 1.98 kg |
Radome Material | UV Stable SAN Marine ASA |
Radome Colour |
Brilliant White Pantone P 179-1 C |
Mounting Type | Wall and pole mount |
Environmental Specifications, Certification & Approvals | |
Wind Survival |
Antenna wind survival: <250 km/h Included Z-Bracket wind survival: <160km/h Optional bracket BRKT-030* is required for wind speeds of <250 km/h |
Temperature Range (Operating) | -40°C to +80°C |
Environmental Conditions | Outdoor/Indoor |
Water ingress protection ratio/standard | IP65 |
Salt Spray | MIL-STD 810F/ASTM B117 |
Operating Relative Humidity | Up to 98% |
Storage Humidity | 5% to 95% - non-condensing |
Storage Temperature | -40°C to +80°C |
Flammability Rating | UL 94-HB, ECE-R118.02 Certified cables |
Impact Resistance | IK 08 |
Environmental & Product Safety Compliance |
Complies with CE, EN, CSA, RoHS and IEC standards, E-mark certified |
Downloads
Comparison With Other XPOLs
|
XPOL-6-10M | XPOL-2 | XPOL-2-5G |
---|---|---|---|
Gain (Max) | 11dBi | 9dBi | 11dBi |
Supported Network | WiFi, 2G, 3G, 4G | WiFi, 2G, 3G, 4G | WiFi, 2G, 3G, 4G, 5G |
Supported Frequency Bands |
1710 - 2700 MHz |
698 - 960 MHz 1710 - 2170 MHz 2300 - 2400 MHz 2500 - 2700 MHz |
698-960 MHz 1710-2700 MHz 3400-3800 MHz |
Supported Network/Frequency (WiFi) |
WiFi 2.4GHz | WiFi 2.4GHz | WiFi 2.4GHz |
Supported Network/Frequency (TDD LTE) In MHz |
Band 40 (230 - 2400) Band 41 (2496 - 2690) |
Band 38 (2570 - 2620) Band 40 (2300 - 2400) Band 41 (2496 - 2690) Band 44 (703 - 803) |
Band 40 (2300 - 2400) Band 41 (2496 - 2690) Band 44 (703 - 803) |
What’s in the Box
Product Box’s Content Includes:
- Antenna: Poynting A-XPOL-0002-V3
- Mounting bracket: Z-shaped mounting bracket
You can watch here to see what the XPOL-2-5G looks like.
Images and Illustrations
Performance Plots


Mounting Options:

Ordering Information
SKU | A-XPOL-0002-V3-01 | A-XPOL-0002-V3-02 | A-XPOL-0002-V3-03 |
---|---|---|---|
EAN | 6009880915750 | 6009710920107 | 6009710920121 |
HS Code | #85291069 | #85291069 | #85291069 |
Packaged Weight | 1.98kg | 1.86kg | 2.3kg |
Packaged Dimensions | 375 x 267 x 98 mm | 375 x 267 x 98 mm | 375 x 267 x 98 mm |
Master Box QTY | 10 | 10 | 10 |
Master Box Weight | 22.7kg | 19kg | 24.07kg |
Master Box Dimensions | 550 x 390 x 500mm | 550 x 390 x 500mm | 550 x 390 x 500mm |
Product Option to Choose From (Antenna Variants)
Please take note, that you need to choose from one of the options below when adding this antenna to your shopping cart.
Option 1: 5m coax with SMA (Male):
- Cable length: 5m ±5%
- Coax cable type: Twin HDF-195
- Connector type: 2 x SMA (Male), With finger grips for easier connection
- Commercial Name: XPOL-2-V3-5G
- Order Product Code: A-XPOL-0002-V3-01
- EAN Number: 6009880915750
Option 2: 10m coax with SMA (Male):
- Cable length: 10m ±5%
- Coax cable type: Twin HDF-195
- Connector type: 2 x SMA (Male), With finger grips for easier connection
- Commercial name: XPOL-2-V3-5G
- Order product code: A-XPOL-0002-V3-03
- EAN number: 6009710920121
Option 3: Bulkhead N-Type (Female):
- Cable Length: NA
- Coax Cable Type: NA
- Connector Type: Bulkhead N-Type (Female)
NOTE: This variant doesn’t come with cables, so you need to provide your own, or buy a pair of Poynting CAB-49 cable.
How to Buy the XPOL-2-5G
To buy this Wifi/4G/5G Outdoor Panel Antenna, simply click on the “add to cart” button and go through the secured checkout process. You can use any Credit Card supported by Stripe Payment Gateway.
You can also order via phone call, just dial +353 222 3440.
You could also drop by and buy from our physical store located Novatel Communications, 12 Main Street, Buttevant, Co. Cork P51 K066
We ship nationwide and overseas.
If you’re looking for the older XPOL-2 model, then click on this link.
If you need an external outdoor router enclousure plus XPOL-2-5G antenna in one, then get the EPNT-2.