Teltonika TCR100: 4G LTE-Advanced Wi-Fi Router For Home Office & Industrial Use
€241.00
Ex Tax: €195.94
- Stock: In Stock
- Brand: Teltonika Networks
- Model: TCR100
- Weight: 632.00g
- Dimensions: 148.00mm x 173.00mm x 71.00mm
- MPN: TCR100
If you’re looking for advance LTE router for your home or small-office, then look no further! Meet the TCR100, ideal for home Wi-Fi use, with a mobile network backhaul speed of up to 300Mbps (still depends on your mobile network plan). If your use case doesn’t require any industrial features, then this baby is the right one for you.
Please read the whole tech specs to learn more.
Key Features
- Wi-Fi: Dual-Band with 2.4 GHz & 5.0 GHz frequencies
- Durable: Ruggedized housing with heatsink for thermal efficiency
- RMS Compatible: Enabling remote access and on-demand VPN services
- Secure: Firewall and numerous VPN services including OpenVPN, IPsec, PPTP, L2TP & DMVPN
- 4G LTE-Advance: LTE CAT6 enables cellular speeds up to 300Mbps with carrier aggregation
- RUTOS: Powerful OS with intuitive UI based on OpenWrt empowers endless configuration possibilities
Why TCR100
- Reliable, secure and easy to use: TCR100 is the perfect choice for any home network.
- Two Ethernet interfaces and Dual-band Wi-Fi allow to connect multiple devices with ease.
- With 4G LTE-A technology you can use TCR100 as a primary or a backup connectivity source.
- TCR100 features connectivity indicators, Wi-Fi, and Wi-Fi Protected buttons for quick and simple setup.
Technical Specification
| MOBILE | |
|---|---|
| Mobile Module | 4G+ (LTE-A): Cat 6 up to 300 Mbps, 3G: Up to 42 Mbps |
| Status | Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID |
| SMS |
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/White List | Operator black/white list |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band Management | Band lock, Used band status display |
| APN | Auto APN |
| Bridge Mode | Bridge mode Direct connection (bridge) between mobile ISP and device on LAN |
| WIRELESS | |
| Wireless Mode | 2.4 GHz (802.11 b/g/n, 2x2 MIMO), 5 GHz (802.11 ac, 1x1 MIMO), Access Point (AP), Station (STA |
| WiFi Security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
| ESSID | ESSID stealth mode |
| Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden |
| Wireless Mesh/Roaming | Wireless mesh (802.11s), fast roaming (802.11r) |
| ETHERNET | |
| WAN |
1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
| LAN | 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
| NETWORK | |
| Routing | Static routes, Dynamic routes |
| Network Protocols |
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL) |
| Connection Monitoring | Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forwards, traffic rules, NAT rules, custom rules |
| DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd |
|
QoS / Smart Queue Management (SQM) |
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | More than 25 service providers, others can be configured manually |
| Network Backup | Mobile, Wired and Wi-Fi WAN options, each of which can be used as an automatic Failover |
| Load Balancing | Balance Internet traffic over multiple WAN connections |
| SSHFS | Possibility to mount remote file system via SSH protocol |
| SECURITY | |
| Authentication | Pre-shared key, digital certificates, X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
| Attack Prevention |
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | Tag based VLAN separation |
| Mobile Quota Control | Option to set custom data limit |
| WEB Filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
| Access Control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
| VPN | |
| OpenVPN | Multiple clients and a server can run simultaneously, 12 encryption methods |
| OpenVPN Encryption |
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| IPSec | IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) |
| GRE | GRE tunnel |
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3 support |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
| DMVPN | Method of building scalable IPsec VPNs |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| MODBUS TCP SLAVE | |
| ID filtering | Respond to one ID in range [1;255] or any |
| Allow remote access | Allow access through WAN |
| Custom registers |
MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality |
| MODBUS TCP MASTER | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| MQTT GATEWAY | |
| Gateway | Allows sending commands and receiving data from MODBUS Master trough MQTT broker |
| DNP3 | |
| Supported modes | TCP Master, DNP3 Outstation |
| DATA TO SERVER (PLANNED) | |
| Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis |
| MONITORING & MANAGEMENT | |
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
| FOTA | Firmware update from server, automatic notification |
| SSH | SSH (v1, v2) |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
| CALL | Reboot, Status, Mobile data on/off, Output on/of |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
| MQTT | MQTT Broker, MQTT publisher |
| SNMP | SNMP (v1, v2, v3), SNMP trap |
| JSON-RPC | Management API over HTTP/HTTPS |
| MODBUS | MODBUS TCP status/control |
| RMS | Teltonika Remote Management System (RMS) |
| IoT PLATFORMS | |
| Clouds of Things | Allows monitoring of: Device data, Mobile data, Network info, Availability |
| ThingWorx | Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| Cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
| Azure IoT Hub | Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
| SYSTEM CHARACTERISTICS | |
| CPU | QCA9531, MIPS 24kc, 650 MHz |
| RAM | 128 MB, DDR2 |
| FLASH storage | 16 MB, SPI Flash |
| FIRMWARE / CONFIGURATION | |
| WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
| FOTA | Update FW/configuration from server |
| RMS | Update FW/configuration for multiple devices at once |
| Keep Settings | Update FW without losing current configuration |
| POWER | |
| Connector | 4 pin industrial DC power socket |
| Input Voltage Range | 9: 30 VDC, reverse polarity protection, voltage surge/transient protection |
| Power Consumption | 3.7 W average, 9.3 W max |
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) | |
| Ethernet | 2 x RJ45 ports, 10/100 Mbps |
| Status LEDs | 1 x Internet, 1 x Wi-Fi, 3 x Mobile connection strength, 2 x Ethernet status |
| SIM | 1 x SIM slots (Mini SIM: 2FF), 1.8 V/3 V, external SIM holder (Embedded SIM variant available) |
| Antenna | 2 x SMA for LTE, 2 x Internal for 2.4 GHz Wi-Fi, 1 x Internal for 5 GHz Wi-Fi |
| Power | 1 x 4 pin DC connector |
| WPS | WPS activation button |
| Wi-Fi On/Of | Wi-Fi enable/disable button |
| Reset | Reboot/User default reset/Factory reset button |
| PHYSICAL SPECIFICATION | |
| Casing Material | Plastic housing with aluminum screws and heatsink |
| Dimensions (W x H x D) | 150 x 37 x 105 mm |
| Weight | 376g |
| Mounting Options | Flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating Temperature | -40 C to 75 C |
| Operating Humidity | 10 % to 90 % non-condensing |
Downloads
- Download Tech Spec (PDF)
- Download User Manual (PDF)
How to Login to WebGUI
- To enter the router’s Web interface (WebUI), type
http://192.168.1.1into the URL field of your Internet browser. - To access router’s WebUI use admin as username and password given in the information label on the bottom side of the router (image A), when prompted for authentication.
- After you log in, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is mandatory, and you will not be able to interact with the router’s WebUI before you change the password.
- When you change the router’s password, the Setup wizard will start. The Setup wizard is a tool used to set up some of the router’s main operating parameters.
- Go to the Overview page and pay attention to the Signal Strength indication (image B). To maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal conditions.
Package Content
Box Content Include the Following:
- 18 W PSU
- RMS Flyer
- TCR100 Router
- SIM Adapter kit
- Ethernet cable (1.5 m)
- QSG (Quick Start Guide)
- 2 x LTE antennas (swivel, SMA male)
Where To Buy?
You can order the Teltonika TCR100 4G & WiFi Router online using Add to Cart button. Then go through checkout page and process your order. You can pay securely using your Credit Card via our secure page, powered by Stripe Payment Gateway or AIB Authipay Gateway.
You could also drop by and buy from our physical store located Novatel Communications, Main Street, Buttevant, Co. Cork P51 K066.
