Teltonika RUT360: CAT6 300Mbps 4G LTE Router With Carrier Aggregation Support & Multiple VPN Support
Hot
Fast Delivery via DPD
€256.00
Ex Tax: €208.13
- Stock: In Stock
- Brand: Teltonika
- Model: RUT360
- Dimensions: 148.00mm x 173.00mm x 71.00mm
- MPN: RUT360
Highly Recommended Addons
The versatile Teltonika RUT360 4G LTE Router, is the latest iteration of the best-selling RUT240 4G/LTE Router. This compact but powerful all-around network router offers various ways to connect to the Internet. You can connect via the cellular network, Wi-Fi, and the Wired Ethernet Network.
This model features an 802.11 b/g/n WiFi network, a Cat6 (300Mbps) 4G/LTE Cellular module: with Carrier Aggregation support, and two (2) Ethernet Ports.
Like the other Teltonika network routers, this device is also compatible with Teltonika Remote Management System, enabling you to manage various aspects of the router and you can tweak/configure it from any remote location, without the need for a public static IP address. Great for IoT and M2M applications.
NOTE: In case you are not getting enough signal coverage from your mobile operator, such as; Three, Meteor, EIR, or Vodafone, then you can pair it with an outdoor panel antenna like the XPOL-2-5G MIMO Antenna.
4G LTE Router With Support For Known Best VPN Protocols
While connected to any mobile operator, or any wireless or wired Internet backhaul that you have, you can secure your network with the router’s robust and powerful firewall, and numerous VPN services, including OpenVPN, Wireguard, and ZeroTier.
See the full technical specification below, to learn more.
RUT360 VS. RUT240 Quick Comparison
|
|
RUT360 | RUT240 |
|---|---|---|
| Mobile Module |
4G (LTE): Cat 6 up to 300 Mbps 3G: Up to 42 Mbps |
4G (LTE): Cat 4 up to 150 Mbps 3G: Up to 42 Mbps 2G: Up to 236.8 kbps. |
| Wireless Mode |
2x2 MIMO Access Point (AP), Station (STA) |
Access Point (AP), Station (STA) |
| LAN | 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover | 1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| WAN |
1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
1 x WAN (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| VPN | OpenVPN, WireGuard, ZeroTier, Others | OpenVPN, Others |
Technical Specifications
| MOBILE | |
|---|---|
| Mobile Module | 4G (LTE): Cat 6 up to 300 Mbps, 3G: Up to 42 Mbps |
| Status | Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS, auto reply |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/Whiles list (planned) | Operator black/white list |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band management | Band lock, Used band status display |
| APN | Auto APN |
| Bridge mode | Direct connection (bridge) between mobile ISP and device on LAN |
| WIRELESS | |
| Wireless mode | 802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA) |
| WiFi security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
| ESSID | ESSID stealth mode |
| Wireless Hotspot | Captive portal (Wi-Fi Hotspot), internal/external Radius server, SMS OTP, MAC auth, built-in customizable landing page, walled garden |
| ETHERNET | |
| WAN |
1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
| LAN | 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover |
| NETWORK | |
| Routing | Static routes, Dynamic routes (planned) |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned) |
| Connection monitoring | Ping Reboot, Wget reboot, Periodic Reboot, LCP, and ICMP for link inspection |
| Firewall | Port forwards, traffic rules, NAT rules, custom rules |
| DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd |
| QoS / Smart Queue Management (SQM) (planned) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS (planned) | The DDNS feature supports 25+ service providers, others can be configured manually |
| Network backup | Mobile, Wired, and WiFi WAN options, each of which can be used as an automatic Failover |
| Load balancing | Balance Internet traffic over multiple WAN connections |
| SSHFS (optional) | SSHFS allows the possibility to mount remote file systems via SSH protocol (not available in standard FW) |
| SECURITY | |
| Authentication | The pre-shared key, digital certificates, X.509 certificates |
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | Tag-based VLAN separation |
| Mobile quota control | Custom data limits for both SIM cards |
| WEB filter (planned) | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
| Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
| VPN | |
| OpenVPN | Multiple clients and a server can run simultaneously, 12 encryption methods |
| OpenVPN Encryption | DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
| IPSec | IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) |
| GRE | GRE tunnel |
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3 support (planned) |
| Stunnel (planned) | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
| DMVPN (planned) | DMVPN is a method of building scalable IPsec VPNs |
| SSTP (planned) | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| MODBUS TCP SLAVE (PLANNED) | |
| ID filtering | Respond to one ID in the range [1;255] or any |
| Allow remote access | Allow access through WAN |
| Custom registers | Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality |
| MODBUS TCP MASTER (PLANNED) | |
| Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 |
| Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
| MQTT GATEWAY (PLANNED) | |
| Gateway | The Gateway functionality allows sending of commands and receiving data from Modbus Master through MQTT broker. Novatel has more Teltonika Gateway products on the site. |
| DATA TO SERVER (PLANNED) | |
| Protocols | HTTP(S), MQTT, Azure MQTT, Kinesis |
| MONITORING & MANAGEMENT | |
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
| FOTA | Firmware update from server, automatic notification |
| SSH | SSH (v1, v2) |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
| CALL | Reboot, Status, Mobile data on/off, Output on/off |
| MQTT (planned) | MQTT Broker, MQTT publisher |
| SNMP (planned) | SNMP (v1, v2, v3), SNMP trap |
| JSON-RPC | Management API over HTTP/HTTPS |
| Modbus (planned) | Modbus TCP status/control |
| RMS | Teltonika Remote Management System (RMS) |
| IoT PLATFORMS | |
| Clouds of things | Allows monitoring of Device data, Mobile data, Network info, Availability |
| ThingWorx | Allows monitoring of WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
| Cumulocity | Allows monitoring of; Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type, and IP |
| Azure IoT Hub | Can send device IP, Number of bytes sent/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
| SYSTEM CHARACTERISTICS | |
| CPU | QCA9531, MIPS 24kc, 650 Mhz |
| RAM | 128 MB, DDR2 |
| FLASH storage | 16 MB, SPI Flash (Optional up to 256 MB) |
| FIRMWARE / CONFIGURATION | |
| WEB UI | Update FW from a file, check FW on the server, configuration profiles, configuration backup |
| FOTA | Update FW/configuration from the server |
| RMS | Update FW/configuration for multiple devices at once |
| Keep settings | Update FW without losing the current configuration |
| INPUT/OUTPUT | |
| Configurable I/O | 2 x Configurable digital Inputs/Outputs. Digital input 0: 6 V detected as logic low, 8: 30 V detected as logic high. Open collector output, max output 30 V, 300 mA |
| Events | SMS, Email, RMS |
| POWER | |
| Connector | 4-pin industrial DC power socket |
| Input voltage range | 9: 30 VDC, reverse polarity protection, voltage surge/transient protection |
| Power consumption | 10.5W max |
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) | |
| Ethernet | 2 x RJ45 ports, 10/100 Mbps |
| I/Os | 2 x Configurable digital Inputs/Outputs on the 4-pin power connector |
| Status LEDs | 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power |
| SIM | 1 x SIM slots (Mini-SIM: 2FF), 1.8 V/3 V, external SIM holders |
| Antenna | 2 x SMA for LTE, 2 x RP-SMA for WiFi |
| Power | 1 x 4 pin DC connector |
| Reset | Reboot/User default reset/Factory reset button |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminum housing with DIN rail mounting option |
| Dimensions (W x H x D) | 100 x 30 x 85 mm |
| Weight | 247g |
| Mounting options | DIN rail, flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 C to 75 C |
| Operating humidity | 10 % to 90 % non-condensing |
Updated on
What’s In The Box
Standard Package Contains:
- The RUT360 Unit
- 18 W Euro PSU
- 2 x LTE antennas (swivel, SMA male)
- 2 x WiFi antenna (swivel, RP-SMA male)
- Ethernet cable (1.5 m)
- QSG (Quick Start Guide)
- RMS Flyer
Downloads
How To Login To Webui
- To configure the Router, you need to login to the Web Admin GUI: the router’s Web interface (WebUI), type in
192.168.1.1into the URL field of your favorite Internet browser, like Firefox or Chrome. - Use the default login details (shown in the reference image below: Image A), when prompted for authentication.
- When successfully logged in, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is mandatory, and you will not be able to interact with the router’s WebUI before you change the password.
- When you change the Web Admin password, the Configuration Wizard will start. The Configuration Wizard is a tool used to set up some of the router’s main operating parameters.
- Go to the Overview page and pay attention to the Signal Strength indication (Image B). To maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal conditions. If weak signal reception persists in your area or room, then we highly recommend getting one of Poynting 4G/5G Outdoor Antenna.
Webui Reference Images
How & Where to Buy?
To buy the Teltonika RUT360 4G LTE Router, you can drop by our store (needs prior appointment) located at Novatel Communications, Main Street, Buttevant, Co. Cork, Ireland.
To purchase online, simply click on the Add to Cart button, and then go through the fast, easy, and secured checkout process. Payment is provided for your convenience via Stripe or AIB Payment Gateway. You can use any card supported by them (MasterCard, Visa, American Express, Diners, and more…).
How Will My Order Be Delivered?
Your order(s) will be shipped via express delivery and are normally delivered within 1-4 business days. Your order will be dispatched directly from our warehouse and you will be provided a piece of tracking information for your order after it is dispatched. If you have any questions on your order status, please contact us.
