Poynting XPOL-1 4G/LTE Omnidirectional Outdoor Antenna For Routers & Iot Devices

The XPOL-1 omnidirectional outdoor panel antenna is a 4dBi LTE antenna. It is backward compatible with 3G and 2G networks and not only that, it can handle future networks, since it can cover wide range of frequencies for up to 2700MHz. FYI, LTE operates on 800, 1800 and 2600MHz, while 3G sits on 900 or 2100Mhz.

This model incorporates two separately fed antennas housed in a single casing. The antenna is geared to provide client-side MIMO operation and diversified support for todays’ network and tomorrow. It provides a cost effective solution in enhancing signal throughput, reception and reliability. Thereby, improves user experience and secures client retention. Very ideal for network application like; GSM, LTE, HSPA, 3G, EDGE or GPRS.

This 4G/LTE antenna is one of the highest rated antenna model in Ireland, UK, Europe and also throughout South Africa. Members of forums sites usually mentions this as one of the best omnidirectional antenna that you can either mount using poles, walls or even windows (using the suction cup that came with it). Forum members had success tweaking and speeding up their broadband using this 4dBi antenna.

DIY aficionados had success using this signal enhancing device and have been known to work with the Telekom Speedport II modem+router, along with the Huawei B593s and B315s models.

A 5 meter cable (2pcs) and suction plastic cup comes with this LTE model.

For more information about this product, please see download section at the bottom of this page.

Key Features

• Wideband omni-directional LTE antenna
• 3G & 2G back compatible
• Cross polarized dual antenna in one housing (best for LTE)
• Pole, wall or window (with suction cup) mountable
• Weather-proof

Application Areas

• Urban and rural areas
• Residential and Small & Medium Business
• Small offices in semi underground areas
• Poor data signal reception (indoor or outdoor)
• Slow data transmission connection
• Unstable connection
• Increase system transmission reliability
• LTE fringe areas (close to an LTE area, but just out of reach)
• Network operator flexibility - as the antennas is wideband, a new antenna is not needed per network operator - works on most networks

Wideband

The XPOL-1 outdoor omni-directional antenna can handle a wide range of frequencies, making it future proof.

The XPOL-1 LTE antenna can cover the following frequencies:

• 790 - 960
• 1710 - 2700 MHZ

Know What Frequencies Used By What Network Group:

Take note of the frequencies mentioned above and matched to these details. You’ll know what network group the XPOL-1 can support.

• 4G (aka LTE) is either at 800, 1800 or 2600Mhz
• 3G (aka WCDMA) is either at 900 or 2100Mhz
• GSM (Voice) is always at 900Mhz

NOTE: Checkout the Irish Networks & Frequencies page to know more.

Additional Information