StellaDoradus SD i-Repeater iR4-EU - Cloud Controlled Signal Repeater for Voice/SMS, 4G LTE & 3G Data (800/ 900/ 1800/ 2100)



- Stock: In Stock
- Brand: StellaDoradus
- Model: iR4-EU
- Weight: 2.00kg
- Dimensions: 43.00cm x 30.00cm x 3.80cm
- MPN: iR4-EU
Available Options
Supported Frequency Bands: 800/ 900/ 1800/ 2100
The StellaDoradus i-repeater – A Cloud Controlled Cellular Repeater Solution For Enterprises
After rigorous hours in development, StellaDoradus has created cutting-edge technology and are proud to release a brand new device called "i Repeater". The iR4-EU model has 2 ports sold with 2X 2-port splitters, which enables the repeater to use up to 4 internal antennas for extended internal coverage.
So What Is i-Repeater?
i-Repeater is a new type of mobile signal repeater that can be monitored and controlled over the internet. Ideal for commercial large scale deployment such as; hospitals, carparks, basements, supermarkets, and multi-storey buildings.
It is useful for customer, contractor or installers who wish to monitor their installed repeaters from one remote location via the Internet.
If you're a contractor/installer, this device can save you time, in the case of any issues. You can monitor or remote administer installed devices through the Internet remotely.
You can install this repeater with 4 line-amps (Unfortunately we cannot sell Line Amps n ROI as Line amps are not legal for use in Ireland but we can add splitters and can help tailor design a complete solution for any size building) to enhance mobile signal distribution throughout any building or large installation (as shown in the banner above).
The i-Repeater (and line-amps) can be controlled and monitored from any terminal (laptop, phone, tablet), via an online an Administration GUI.
The i-repeater is 1002 series, which means it is legal and fully compliant to the EU standards.
Where You Can Used This For?
You can use this device to distribute mobile signal into any building size, and at the same time line-amps are also monitored. See image above for reference.
If you're an installer/contractor, you can enjoy monitoring the health of the repeater system, as well as, remotely administer it from the comfort of your home. Monitor the system from your home PC or smart phone.
The i-Repeater amplifies the following frequency bands; 700Mhz, 800MHz, 900MHz, 1800MHz, 2100MHz and 2600Mhz. It comes in two models namely iR5 and iR6.
Models
The the models share the similar specs except for their supported frequency bands. Please see table below.iR5 | iR6 | |
---|---|---|
Supported Frequencies | 700MHz | |
800MHz | 800MHz | |
900MHz | 900MHz | |
1800MHz | 1800MHz | |
2100MHz | 2100MHz | |
2600Mhz | 2600Mhz | |