StellaDoradus iCombiner LTE-Combiner8 - Signal Amplifier For Mobile Data Routers In Ships
It’s a signal amplifier not just for 4G LTE Data, but also for 700MHz, GSM 900, and 3G data. Use this if you want to boost signal reception in your mobile data routers, such as; Cisco, HP, Asus, Huawei, Siemens, Viprinet, Peplink, TP-Link, Tenda, Teltonika, Celerway, EnGenius, Passari, and many others.
This device is a commercial grade cellular amplifier for not just ships (also for Fleet Vehicles, Surveillance Trucks/Vans), that works on all mobile operators. It’s not network specific, it’s frequency specific. It works on all mobile operators in Ireland, EU, UK and the rest of the world.
The CombinerAmp is MIMO activated and can amplify up to 4 radio cards. That’s 4 individual mobile network operators (ie. Tesco, Virgin, 3, Vodafone, etc).
For the SMA external antenna, you can use the factory supplied StellaDoradus antenna or use a suitable 3rd-party antenna, such as a Poynting antennas. On this page, you’ll find an entire range of antennas to choose from, MIMO compatible antennas, directional or omnidirectional, choose that will best suit your requirements.
How It Works Quick Overview
- The MIMO antennas are installed outside your ship, and receive the mobile signal.
- This signal is then sent to the iCombinerAmp and is boosted.
- From there, the signal is sent to your router.
- The up-link signals from your radio cards are amplified and sent back to the mobile tower.
- You can setup alerts for: Overpower, temperature, shutdown, loss of communication + more. (Available in rack mounted products only, Licence required)
- Capable of being controlled and monitored via StellaDoradus Cloud Platform
- Support fr EU Frequencies: 700 / 800 / 900 / 1800 / 2100 / 2600MHz
- You can monitor and control gains on each band
- 2X MIMO Capable (DL only)
- GEO tracking
- Pass Thru
- RF OFF
Supported Frequency Band
Only specific to the iCombiner LTE-Combiner8 Model.
Typical Applications / Usage Scenarios
This mobile network signal amplifier is not just for ships, but can definitely be used in other applications like the following:
- Fleet vehicles
- Mountain Rescue
- Police Cars/Vans
- WiFi Coffee Shops
- Emergency response
- Surveillance Vans/Trucks
- Yachts, Cruise Ships, Fishing Vessels
- Communications hub for on-the-road vehicles
Quick Installation Overview
The iCombinerAmp is capable of boosting mobile signal of up to 4x radio cards. Take a look at the Pepwave HD4 below, as an example. The blue lines signifies the main ports, while the green ones are auxiliary ports. Each radio card needs a pair, 1-main and 1-aux port.
The 2x outdoor antennas picks up the weak data signal, and takes it in to the amplifier devices and boosts the signal for all 4 radio cards (or 4 network operator). This reduces a total run of 8 cables down to just 2, making installation quicker and simpler.
The 2x1 MIMO will double your download speeds in many cases. If you have some special application or requirement, you can take a look at our large selection of Poynting MIMO Antennas and pick what best suits your needs.
|Gain||Uplink Gp: 15dB|
Downlink Gp> 15dB
|Pass Band Ripple||<4dB|
|I/O impedance||50 ohm/SMA female connector|
|Max up/down signal strength||27dBm / -25dBm|
|Ambient Temperature||-30°C to +70°C|
|Power Supply Input||110 - 240V AC|
|AGC Level Control||Automatic (Automatically adjusts during installation. Thereafter, automatically adjusts for seasonal variation in pathloss between the base|
station and the outdoor antenna)
|Uplink Switch On||Yes (The uplink amplifiers switch off when the repeater is not in use. This reduces the uplink noise to almost zero. When the repeater is in use (phone call or data session), the uplink amplifiers switch on for the duration of the call/ data session only.)|
|Surge Protection||SMA connectors DC grounded, 12V DC port MOV protected|
|Ports (SMA)||8X ports (4 Radio cards 2X1 MIMO)|
|Antennas (Outdor Omnis)|
|3dB Beam Pattern||38º x 35º|
|Bandwidth||700MHz – 2700MHz|
|Front to Back Ratio||> 20dB|
|Termination||N-Female (SMA for Older Version)|
|Cross Polarisation Discrimination||-20dB|
|Working temperature||-40ºC to +65ºC|
|Note: Specifications are subject to change without prior notice.|
What's In The Box
Standard Kit Includes the Following:
- The iCombiner LTE-Combiner8 Mobile Signal Amplifier Device
- External Antennas
- Power Supply
- Pigtail Splitters
- External Coaxial Cable (SD400)
How & Where to Buy?
To buy this Mobile Signal Amplifier For Routers, you can drop by (requires prior appointment) our store located at Novatel Communications, 12 Main St, Buttevant, Co. Cork, P51 K066, Ireland.
To order online, simply click on the Add to Cart button, and then go through the fast, easy and secure checkout process. Payment is provided for your convenience via Authipay Payment Gateway. You can use any supported (MasterCard, Visa, American Express, Diners, etc).
How Will My Order Be Delivered?
Your order(s) will be shipped via express delivery and are normally delivered within 1-4 business days. Your order will be dispatched directly from our warehouse and you will be provided a tracking information for your order, after it is dispatched. If you have any questions on your order status, please contact us.