Teltonika TRB141 - LTE Cat1 10Mbps Industrial Rugged GPIO Gateway
Its a 10Mbps capable LTE gateway, that supports VPN, IPSec, FOTA and Firewall feature. Great for low bandwidth requirement, where your main goal is remote connection, remote monitoring and control. Equipped with secure RutOS router software, sufficient processing power, and Teltonika Networks Remote Management System (RMS), this device can offer application flexibility to manage and control equipment remotely over LTE Cat 1.
- Remote Retail Refrigeration Monitoring
- Remote Grain Container Monitoring
|Mobile Module||4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps|
|Bridge||Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received|
|Status||SMS status, SMS configuration, Call utilities|
|Network Protocols||TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL v3, TLS, SSH, DHCP, SNMP, MQTT|
|Bridge||Direct connection (bridge) between mobile ISP and device on LAN|
|Connection Monitoring||Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection, Wget|
|Firewall||Port forwards, traffic rules, custom rules|
|DHCP||Static and dynamic IP allocation|
QoS / Smart Queue
Management (SQM) (planned)
|Traffic priority queuing by source/destination, service, protocol or port|
|DHCP||Supported >25 service providers, others can be configured manually|
|Authentication||Pre-shared key, digital certificates, X.509 certificates|
|Firewall||Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T|
|Access Control||Flexible access control of TCP, UDP, ICMP packets, MAC address filter|
|OpenVPN||Multiple clients and a server can run simultaneously, 12 encryption methods|
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC,
|Ipsec||IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)|
|PPTP, L2TP||Client/Server services can run simultaneously|
|MONITORING & MANAGEMENT|
|WEB UI||HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, system log, kernel log|
|FOTA||Firmware update from sever, automatic notification|
|SSH||SSH (v1, v2)|
|SMS||SMS status, SMS configuration|
|MQTT||MQTT Broker, MQTT publisher|
|JSON-RPC||Management API over HTTP/HTTPS|
|Modbus||Modbus TCP status/control|
|RMS||Teltonika Remote Management System (RMS)|
|CPU||ARM Cortex-A7 1.2 GHz CPU|
|RAM||128 MB (50 MB available for userspace)|
|FLASH memory||512 MB (200 MB available for userspace)|
|FIRMWARE / CONFIGURATION|
|WEB UI||Update FW from file, check FW on server, configuration profiles, configuration backup|
|FOTA||Update FW/configuration from server|
|RMS||Update FW/configuration for multiple devices|
|Keep settings||Update FW without losing current configuration|
|Operating System||RutOS (OpenWrt based Linux OS)|
|Supported languages||Busybox shell, Lua, C, C++|
|Development tools||SDK package with build environment provided|
|Input||2 x Digital inputs (configurable passive or active), 1 x Isolated input, 1 x Analog input (4-20 mA)|
|Output||2 x Relay outputs (latching and non latching)|
|Configurable I/O||2 x Configurable Digital Inputs/Outputs on 4 pin power connector|
|Connector||4 pin industrial DC power socket|
|Input voltage range||9 – 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10μ max|
|Power consumption||< 5 W|
|PHYSICAL INTERFACES (PORTS, LEDS, ANNTENAS, BUTTONS, SIM)|
|USB||Virtual network interface via USB|
|I/Os||16 Inputs/Outputs pin connector, 2 Inputs/Outputs pin on 4 pin power connector|
|Status LEDs||3 x connection type status LEDs, 5 x connection strength LEDs, 1x Power LED|
|SIM||1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V|
|Power||4 pin power connector with 2 x configurable Digital Inputs/Outputs|
|Anntenas||1 x SMA for LTE|
|Reset||Restore factory settings button|
|Casing Material||Aluminum housing|
|Dimensions||64.4 x 74.5 x 25 mm (L x W x H)|
|Mounting options||Bottom and sideways DIN rail, Flat surface and direct PCB on DIN-Rail mounting options|
|Operating Temperature||-40 °C to 75 °C|
|Operating humidity||10 % to 90 % non-condensing|
|Ingress Protection Rating||IP30|
|REGULATORY & TYPE APPROVALS|
|Regulatory||CE/RED, EAC, RoHS, WEEE|
How to Login to Admin GUI
- Power on the device and connect the USB cable to your computer.
- Allow the gateway to boot up. This might take up to 30 seconds.
- Your computer’s OS should detect the USB device and install the driver.
- To enter the gateway’s Web interface (WebUI), type
http://192.168.2.1into the URL field of your Internet browser.
- Use login information (admin/admin01) when prompted for authentication.
- Download Tech Spec (PDF)
How & Where to Buy?
To buy the TRB141 LTE Gateway, you can pickup from our store (needs prior appointment) located at Novatel Communications, 24 Main Street, Buttevant, Co. Cork, Ireland.
To purchase online, simply click on the Add to Cart button, and then go through the fast, easy and secure checkout process. Payment is provided for your convenience via Stripe Payment Gateway. You can use any card supported by it (MasterCard, Visa, American Express, Diners, and more…).
How Will My Order Be Delivered?
Your order(s) will be shipped via express delivery and are normally delivered within 1-4 business days. Your order will be dispatched directly from our warehouse and you will be provided a tracking information for your order, after it is dispatched. If you have any questions on your order status, please contact us.