Menu
Your Cart
Shipping
+353 222 3440
Enquire

EnGenius EnStation5-AC - 867Mbps 5GHz 26dBm Outdoor 5Km Long Range Wireless Client Bridge & Access Point

EnGenius EnStation5-AC - 867Mbps 5GHz 26dBm Outdoor 5Km Long Range Wireless Client Bridge & Access Point
EnGenius EnStation5-AC - 867Mbps 5GHz 26dBm Outdoor 5Km Long Range Wireless Client Bridge & Access Point
EnGenius EnStation5-AC - 867Mbps 5GHz 26dBm Outdoor 5Km Long Range Wireless Client Bridge & Access Point
EnGenius EnStation5-AC - 867Mbps 5GHz 26dBm Outdoor 5Km Long Range Wireless Client Bridge & Access Point
EnGenius EnStation5-AC - 867Mbps 5GHz 26dBm Outdoor 5Km Long Range Wireless Client Bridge & Access Point
EnGenius EnStation5-AC - 867Mbps 5GHz 26dBm Outdoor 5Km Long Range Wireless Client Bridge & Access Point
Hot
Fast Delivery via DPD
Note For Point-to-Point Configuration

You will need a pair of these units to configure a Point-to-Point System

Based on 0 reviews. - Write a review
€167.00
Ex Tax: €135.77
  • Stock: In Stock
  • Brand: EnGenius
  • Model: EnStation5-AC
  • Weight: 1.05kg
  • Dimensions: 32.00cm x 8.60cm x 24.80cm
  • EAN: 4713361934605
  • MPN: 1102A1251301
Add to Cart
Buy Now Ask Question
Add to Wish List

NOTE: You will need a pair of these units in order to configure a Point-to-Point Bridge. The EnStation5-AC is an outdoor 5GHz 802.11ac Wave2 Long-Range Point-to-point Wireless Bridge, that you can use to extend existing Internet connection and share wirelessly. This Wave2-enabled device features a robust housing with IP55 rated enclosure, which is perfect for outdoor use and the device is protected from all weather conditions (designed to withstand harsh environmental conditions, severe and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail, and humidity.).

This AP is equipped with Dual-Radio 2x2 802.11 ac/a/n access point which let you achieve multi-user MIMO (MU-MIMO) in any setup or application.

It is equipped with a high-gain 19dBi dual-polarized directional antenna, which enables you to set up faster and more stable wireless network performance and avoid the hidden node issue. It lets you extend your network up to 5km without a hitch. Connect two LANs across distance, perfect for Calving IP Cameras, Surveillance Systems, Internet Connection Sharing, WiFi Hotspots, or Captive portal applications.

Please read the full product technical specification below.

Typical Application Deployment

Our customers, partners, and installers are using this CPE unit in various applications and scenarios, but not limited to:

  • SmartHomes
  • Building Sites
  • Shopping Malls
  • Stadiums & Arena
  • Public Lightings
  • College Campuses
  • Resort Properties
  • Airport Terminals
  • Corporate Campuses
  • Hospital Buildings
  • Construction Sites
  • Parks & Campgrounds
  • Warehouse Operations
  • Wi-Fi Hotspots Setup

NOTE: Comes with Factory Supplied EU Plugs

Technical Specification

Wireless Radio Specification
Access Point Type Outdoor, IP55, 5GHz 802.11ac 2x2 MU-MIMO is backward compatible with 802.11 a/n mode
SU-MIMO Two (2) spatial stream SU-MIMO for up to 867 Mbps wireless data rate to a single wireless client device
MU-MIMO Two (2) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two(2) wireless client devices simultaneously
Frequency Radio 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz
Supported Radio Technology 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 streams
802.11ac supports very high throughput (VHT) —VHT 20/40/80 MHz
802.11n supports high throughput (HT) – HT 20/40 MHz
802.11n/ac packet aggregation: AMPDU, ASPDU
Supported Modulation Type 802.11a/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Transmit Power (Maximum Value) 23dBm
TX Beamforming (TxBF) Increasing signal reliability and transmitting distance
Supported data rates (Mbps) 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2)
Power
Maximum Power Consumption 7W
Power Source Proprietary 24V PoE (Power: 4, 5; Return: 7, 8)
Antenna
Antenna Types Directional high gain 19dBi antenna
Widely frequency supported from 5150MHz to 5925MHz
Interfaces
Networking Interface Two (2) 10/100/1000 BASE-T RJ-45 Ethernet Ports
PSE Output N/A
LACP Link Aggregation achieves 2Gbps Throughput
LED Indicators Display system and wireless transmission status
Reset Button Reverts configuration to the Factory Defaults or the Users Default
Operating Mode
Access Point Mode (AP Mode) Be an Access Point that behaves like a central connection for stations or clients that support IEEE 802.11 ac/a/b/g/n network
Client Bridge Mode (CB Mode) The Access Point essentially acts as a wireless adapter that connects to an access point to allow a system of wireless access to the network in the client bridge mode
WDS Modes (WDS AP, WDS BR, WDS Station) WDS modes use WDS technology to establish the wireless connection via filling MAC address in both Access Points to enlarge the wireless area
Exquisite RF Management
ACK timeout (Distance Control) Set the ACK timeout to assure the proper distance to deliver the wireless signal properly
Site Survey Scan the signal level of an environment to provide parameters for performing Auto Transmit power and auto channel
Auto Transmit Power Automatically adjust the power level
Auto Channel Automatically assign a clear channel to perform RF transmission under a pervasive environment
RSSI Threshold Kick client devices that the signal (RSSI) is above the set value from the AP for reducing the interference and optimize the connecting quality
Optimize Performance
Quality of Service Compliance with IEEE 802.11e standard
Prioritizes Voice Over IP data for both tagged and untagged traffic
Transmit video, voice, and data at the same SSID
Power Save Mode Support U-APSD
Pre-Authentication Compliance with 802.11i & 11x
PMK Caching Compliance with 802.11i If wireless client devices have authenticated to an access point, it does not perform a full authentication exchange when client devices roaming between access points
Multicast to Unicast Conversion Using the IGMP protocol, an access Point delivers high-definition content to a large number of clients simultaneously
Management
Multiple SSIDs BSSID support
Support 8 SSIDs
Guest Network Isolate each client for avoiding unnecessary touch, leaking sensitive data, and enhancing Internet security and reliability
VLAN Tag Independent VLAN settings can be enabled or disabled. Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID)
VLAN Pass-through Broadcast VLAN-tag packets to find the destination and deliver packages over the defined path. The functions allow network topology to be scalable and flexible
VLAN Per SSID Integrate VLAN ID with an SSID interface to forward packets over the defined path. The functions isolate client devices to get more security
Management VLAN The feature is enabled with specified VLAN ID, the device will only allow management access with the same specified VLAN ID from remote location by using protocols such as telnet, SSH, SNMP, Syslog etc
Traffic Shaping Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point
MAC Address Filtering Filter up to 32 sets of MAC addresses per SSID
E-Mail Alert Provides a network monitoring tool for administrators to stay informed the configuration change
Save Configuration as Users Default Save the customized configuration as the default value for different customer demands
Wi-Fi Scheduler Perform a regular reboot on the access point at the assigned schedule
Perform it to enable or disable the 2.4GHz or 5GHz interface for a period of time
SNMP & MIB & CLI v1/v2c/v3 support
MIB I/II, Private MIB
CLI Supported
RADIUS Accounting Help operators to offload 3G to Wi-Fi seamlessly
Wireless Clients List Provide the list to display the real status of wireless client devices on this Access Point
Security
Wireless Encryption Standard WEP Encryption (64/128/152-bit)
Hide SSID in beacons Yes, Supported
Client Isolation Block/Isolate the communication between the associated clients under the same WLAN
HTTPS A secure communication protocol can be enabled to allow secure management web access over a computer network
SSH Tunnel A secure communication protocol can be enabled to allow secure remote shell access or command execution
Mounting
Pole Mounting Assemble a mounting bracket to fix this Access Point on a pole
Wall Mounting Mount this Access Point on a flat wall
Mechanical & Environment
Dimensions (Device only) 190mm (D) x 38mm (H)
Weight TBD
Operating Temperature: -20°C~60°C (-4°F~140°F)
Humidity: 0%～90% typical
Storage Temperature: -30°C~80°C (-22°F~176°F)
Humidity: 0%～90% typical
Environment Protection Level IP55
Surge Protection Line to Line: 1KV
Ling to Ground: 2KV
ESD Protection Contact: 4KV
Air: 8KV
Compliance Regulatory
FCC Subpart15 B
Subpart C 15.247
Subpart E 15.407
CE EN 301 893
EN 50385
EN 60601-1-1
EN 60601-1-2
EN 55032
EN 55024
RCM AS/NZS 4268
AS/NZS 2772.2
CISPR 22
R&TTE Directive 1995/5/EC Yes
CB IEC 60950-1
IEC 60950-22
S-Mark UL 60950-1

Quick Comparison: EnStation5-AC vs. EnStationAC

EnStation5-AC EnStationAC
Standards 802.11ac Wave2 and a/n 802.11ac Wave 1 and a/n
Frequency 5150MHz~5850MHz

Note:
The supported channels and maximum TX power will vary, depending on local regulations. 		5150MHz~5850MHz

Note:
The supported channels and maximum TX power will vary, depending on local regulations.
TX Power 23dBm 26dBm
Data Rates 867 Mbps 867 Mbps
Antennas Directional 19dBi Directional 19dBi
Physical Interface 1 x Gigabit 24V PoE Input LAN Port
1 x Gigabit Data LAN Port 		1 x Gigabit 802.3af/at Input LAN Port
1 x Gigabit 802.3af PSE Output LAN Port
Radio Chains/Streams 2x2: 2 2X2: 2

How & Where to Buy?

To buy the EnStation5-AC Outdoor Long Range CPE, you can drop by our store (requires prior appointment) located at Novatel Communications, 12 Main St, Buttevant, Co. Cork, P51 K066, Ireland.

To order online, simply click on the Add to Cart button, and then go through the fast, easy, and secure checkout process. Payment is provided for your convenience via Authipay Payment Gateway. You can use any supported (MasterCard, Visa, American Express, Diners, etc).

How Will My Order Be Delivered?

Your order(s) will be shipped via express delivery and are typically delivered within 1-4 business days. Your order will be dispatched directly from our warehouse and you will be provided a piece of tracking information for your order after it is dispatched. If you have any questions about your order status, please contact us.

Write a review

Please login or register to review
Tags: long-range-wireless-bridge , 5ghz-long-range-outdoor-ap , wifi-repeater , wif-expander , point-to-point-wireless-bridge

Related Articles

Engenius Outperforms Leading Enterprise Wi-Fi Solutions
Engenius Outperforms Leading Enterprise Wi-Fi Solutions
17 Nov 0

Our Partners

EnGenius
EnGenius
Peplink
Peplink
Poynting
Poynting
StellaDoradus
StellaDoradus
Teltonika
Teltonika
Tenda
Tenda
Webro
Webro
TP-Link
TP-Link